Zaznacz stronę

Cal One 1000

Revolutionary device automating the process of manufacturing glued wall callendars!

Automate the process of wall calendars glueing!

=

Robustness verified on millions of calendars produced each year

=

More than 1000 calendars per hour

=

Made in Poland / EU

Flexible and efficient solution

Cal One 1000 is a revolutionary device automating the process of manufacturing glued wall calendars.

It can work with 1, 2, 3 or 4 pads with 12 tear-off sheets each or 1, 2, 3 pads and a head.

The mechanical speed of the machine is over 1,000 ready calendars per hour, with one device able to substitute 6 to 8 pairs of hands!

Automatic calendar backs feeder

The machine is equipped with a feeder with enough room for a stack of over 50 cm of calendar back.

The maximum length of a calendar back and a ready calendar is 100 cm. The calendar backs are picked by suction cups, and the strong blowers make sure that sheets – originating from both offset and digital printing operations – are separated from each other.

Calendar pads and head glueing

The calendar backs are aligned and then run in a stable manner through the entire machine.

The applied solutions ensure a high level of repeatability and the highest standards of quality of the end product.

Calendar pads feeder

The automatic feeder precisely separates pads from each other, preventing double feeds .

Calendar pads must be cut apart in advance into 12-month sets.

To ensure maximum manufacturing capacity, calendar pads may be added when the machine is in operation.

Semi-automatic calendar head glueing

Calendar heads are glued in a semi-automatic mode.

The operator inserts the head under the suction cups, and the suction cups transport the head and glue it onto the set point.

Only hot-melt glue versions can be set up with a head feeder.

Deliveries units

Depending on your preferences, Cal One may come with a stacker or with a belt at the outlet.

 

Stacker

Stacker has a 50cm capacity.

Belt

Belt can work in batch or stream mode.

Available configurations:

Glue*

=

Hot melt

(Preo Mini melter)

=

Water based

(pneumatic system)

Glueing stations*

=

3 calendar pads

=

4 calendar pads

=

3 calendar pads and head

only with hot-melt

=

4 calendar pads or 3 pads and a head (4th station exchangable)

only with hot-melt

(each opption can support 1 and 2 calendar pads)

Deliveries units*

=

Belt

Batch or stream mode

=

Stacker

With 50cm capacity

* Choose one, appropriate option for you

Technical parameters

TECHNICAL PARAMETERS    
Calendar gluing output – three-sectional More than 1000 pcs / h
Calendar gluing output – one-sectional More than 1000 pcs / h
Minimum cardboard width 250 mm
Maximum cardboard width 330 mm
Ready calendar (output) stacking unit capacity 450 mm (~ 200 pcs)
Cardboard unit capacity 450 mm (~ 2,000 pcs; 230g cardboard)
Minimum calendar block width 250 mm
Maximum calendar block width 330 mm
Dimensions 1300 x 1850 x 3600 mm
Power supply 230V 50 Hz (400V with hot-melt melter)

About Cal One 1000

Contact us for more infomations!

AKONDA – HQ 

ul. Geodetów 176,
Piaseczno / Warszawa,
Poland

15 mins drive
from Warsaw Chopin Airport,

1 hour drive
from Warsaw Modlin Airport.

Production and test site 

Bielsko-Biała, 
Poland

1,5h drive

from Katowice-Pyrzowice Airport,

4h drive

from Warsaw, Bratislava, Vienna.

Contact

info@akonda.pl

Phone/whatsup – PL/EN:
+48 501 773 665

Phone PL/EN/RUS:
+48 604 907 676