Cal One 1000
Revolutionary device automating the process of manufacturing glued wall callendars!
Automate the process of wall calendars glueing!
Robustness verified on millions of calendars produced each year
More than 1000 calendars per hour
Made in Poland / EU
Flexible and efficient solution
Cal One 1000 is a revolutionary device automating the process of manufacturing glued wall calendars.
It can work with 1, 2, 3 or 4 pads with 12 tear-off sheets each or 1, 2, 3 pads and a head.
The mechanical speed of the machine is over 1,000 ready calendars per hour, with one device able to substitute 6 to 8 pairs of hands!
Automatic calendar backs feeder
The machine is equipped with a feeder with enough room for a stack of over 50 cm of calendar back.
The maximum length of a calendar back and a ready calendar is 100 cm. The calendar backs are picked by suction cups, and the strong blowers make sure that sheets – originating from both offset and digital printing operations – are separated from each other.
Calendar pads and head glueing
The calendar backs are aligned and then run in a stable manner through the entire machine.
The applied solutions ensure a high level of repeatability and the highest standards of quality of the end product.
Calendar pads feeder
The automatic feeder precisely separates pads from each other, preventing double feeds .
Calendar pads must be cut apart in advance into 12-month sets.
To ensure maximum manufacturing capacity, calendar pads may be added when the machine is in operation.
Semi-automatic calendar head glueing
Calendar heads are glued in a semi-automatic mode.
The operator inserts the head under the suction cups, and the suction cups transport the head and glue it onto the set point.
Only hot-melt glue versions can be set up with a head feeder.
Depending on your preferences, Cal One may come with a stacker or with a belt at the outlet.
Stacker has a 50cm capacity.
Belt can work in batch or stream mode.
(Preo Mini melter)
3 calendar pads
4 calendar pads
3 calendar pads and head
only with hot-melt
4 calendar pads or 3 pads and a head (4th station exchangable)
only with hot-melt
(each opption can support 1 and 2 calendar pads)
Batch or stream mode
With 50cm capacity
* Choose one, appropriate option for you
|Calendar gluing output – three-sectional||More than 1000 pcs / h|
|Calendar gluing output – one-sectional||More than 1000 pcs / h|
|Minimum cardboard width||250 mm|
|Maximum cardboard width||330 mm|
|Ready calendar (output) stacking unit capacity||450 mm (~ 200 pcs)|
|Cardboard unit capacity||450 mm (~ 2,000 pcs; 230g cardboard)|
|Minimum calendar block width||250 mm|
|Maximum calendar block width||330 mm|
|Dimensions||1300 x 1850 x 3600 mm|
|Power supply||230V 50 Hz (400V with hot-melt melter)|
Contact us for more infomations!
Production and test site
from Katowice-Pyrzowice Airport,
from Warsaw, Bratislava, Vienna.